[MinnowBoard] New Board not Video Output

[Bill Traynor]

On Mon, Jul 20, 2015 at 4:08 PM, Matthew J Blandin <hbbs10 at gmail.com> wrote:
> Hello,
>
> I have just received my Minnowboard Max. Currently, I only have an empty
> micro SD card, however, I am under the impression that when powered up it
> will default to the UEFI command line. When powered and plugged into and
> HDMI compatible screen, the screen says that it is not receiving any video
> input from the HDMI cable and goes into power saving. The board itself has
> only one LED light up (the LED closest to the switch). Does anyone know what
> is causing the problem?

http://elinux.org/Minnowboard:MinnowMax#Known_Issues

I've had this occur with a faulty hdmi cable as well.

>
> Thanks,
> -Matt B
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>