[MinnowBoard] PXE boot: Down rev firmware
John Hawley
john.hawley at intel.com
Wed Jun 24 16:50:37 UTC 2015
You should be able to rev back your firmware without any troubles, what
ipxe.efi are you using?
- John 'Warthog9' Hawley
On 6/23/2015 5:16 PM, Michael wrote:
> Hello,
>
> I have been running the 0.71 firmware for a while and PXE booting my
> minnowboard max.
>
> Today, I upgraded to 0.80 and netbooting is no longer working. I see
> the new verbose messages regarding trying to PXE boot on the console.
> However, on the DHCP side, I just see the board requesting a lease:
>
> Konsole output
> Jun 23 16:15:29 dnsmasq-dhcp[4100]: DHCPDISCOVER(eth1) 00:13:20:fe:31:1f
> Jun 23 16:15:29 dnsmasq-dhcp[4100]: DHCPOFFER(eth1) 192.168.101.35
> 00:13:20:fe:31:1f
> Jun 23 16:15:37 dnsmasq-dhcp[4100]: DHCPDISCOVER(eth1) 00:13:20:fe:31:1f
> Jun 23 16:15:37 dnsmasq-dhcp[4100]: DHCPOFFER(eth1) 192.168.101.35
> 00:13:20:fe:31:1f
> Jun 23 16:15:53 dnsmasq-dhcp[4100]: DHCPDISCOVER(eth1) 00:13:20:fe:31:1f
> Jun 23 16:15:53 dnsmasq-dhcp[4100]: DHCPOFFER(eth1) 192.168.101.35
> 00:13:20:fe:31:1f
>
> But it never accepts it.
>
> So, is anyone else PXE ( ipxe.efi ) booting a minnow board with the
> current 0.80 firmware?
>
> OR can, I back rev my firmware back to 0.71 without causing issues?
>
> Michael
>
>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
More information about the elinux-MinnowBoard
mailing list