[MinnowBoard] PXE boot: Down rev firmware
Michael
michael at kmaclub.com
Wed Jun 24 00:16:19 UTC 2015
Hello,
I have been running the 0.71 firmware for a while and PXE booting my
minnowboard max.
Today, I upgraded to 0.80 and netbooting is no longer working. I see
the new verbose messages regarding trying to PXE boot on the console.
However, on the DHCP side, I just see the board requesting a lease:
Konsole output
Jun 23 16:15:29 dnsmasq-dhcp[4100]: DHCPDISCOVER(eth1) 00:13:20:fe:31:1f
Jun 23 16:15:29 dnsmasq-dhcp[4100]: DHCPOFFER(eth1) 192.168.101.35
00:13:20:fe:31:1f
Jun 23 16:15:37 dnsmasq-dhcp[4100]: DHCPDISCOVER(eth1) 00:13:20:fe:31:1f
Jun 23 16:15:37 dnsmasq-dhcp[4100]: DHCPOFFER(eth1) 192.168.101.35
00:13:20:fe:31:1f
Jun 23 16:15:53 dnsmasq-dhcp[4100]: DHCPDISCOVER(eth1) 00:13:20:fe:31:1f
Jun 23 16:15:53 dnsmasq-dhcp[4100]: DHCPOFFER(eth1) 192.168.101.35
00:13:20:fe:31:1f
But it never accepts it.
So, is anyone else PXE ( ipxe.efi ) booting a minnow board with the
current 0.80 firmware?
OR can, I back rev my firmware back to 0.71 without causing issues?
Michael
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150623/9f4ea12b/attachment.html>
More information about the elinux-MinnowBoard
mailing list