[MinnowBoard] Fastboot Problems - Android Bring-up

Wed Jun 10 02:04:47 UTC 2015

I have reverted to 0.79, which did allow the fastboot image to boot
properly. Now I have to figure out why the DHCP client won't run to get an
IP address.

One step at a time.
Thanks,
--
Dave Smith, PE
@devunwired
On Jun 9, 2015 8:01 PM, "John Hawley" <john.hawley at intel.com> wrote:

> Unless there's something you need in the 0.80 firmware, you may want to
> just back it down to 0.79 for now while we investigate more fully.
>
> - John 'Warthog9' Hawley
>
> On 6/9/2015 6:37 PM, Wei, David wrote:
> > /MNW2MAX1.X64.0080.R01.1505111746/ firmware has “Enabled Dual-HDMI
> > display outputs”.  This should be the cause of this problem.  Android
> > and firmware team have started to look at this issue.
> >
> >
> >
> >
> >
> > Thanks,
> >
> > David | SSG BIOS
> >
> >
> >
> > *From:*elinux-MinnowBoard
> > [mailto:elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of *Dave
> > Smith
> > *Sent:* Tuesday, June 09, 2015 10:33 PM
> > *To:* elinux-minnowboard at lists.elinux.org
> > *Subject:* [MinnowBoard] Fastboot Problems - Android Bring-up
> >
> >
> >
> > Hello all -
> >
> >
> >
> > I’m going through my first run with the MinnowBoard attempting to load
> > the pre-built Android package:
> >
> > https://01.org/android-ia/guides/android-5.x-lollipop-bring-guide
> >
> >
> >
> > I was able to successfully flash the latest firmware, so my board is now
> > running:
> >
> > /MinnowBoard MAX B3 Platform/
> >
> > /MNW2MAX1.X64.0080.R01.1505111746/
> >
> >
> >
> > I downloaded the Android 5.1.0_r1 package for 64-bit from the above link.
> >
> >
> >
> > I am now attempting to boot into fastboot and flash the image. I have
> > successfully flashed the image onto USB media, but when I attempt to
> > boot from that device there are no graphics on the screen (after the
> > secure boot warning), and I can’t do anything useful from the serial
> > console.
> >
> >
> >
> > Here is what I see out the serial console after selecting the USB media
> > as the boot device (and pressing up to bypass the secure boot screen):
> >
> > *****
> >
> > entering Fastboot mode
> >
> > Locating boot image from file \fastboot.img
> >
> > Read boot image from file (13669676 bytes)
> >
> > verify Fastboot boot image
> >
> > decoding keystore data
> >
> > BootSignature format version 1
> >
> >
> >
> > get boot image header
> >
> > decoding boot image signature
> >
> > BootSignature format version 1
> >
> >
> >
> > verifying boot image
> >
> > chainloading fastboot, boot state is ORANGE
> >
> > chainloading boot image, boot state is ORANGE
> >
> > Creating command line
> >
> > Loading the ramdisk
> >
> > ramdisk size 5204458
> >
> > Loading the kernel
> >
> > [    0.019057] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> >
> > [    0.019057] ENERGY_PERF_BIAS: View and update with
> > x86_energy_perf_policy(8)
> >
> > [    0.098678] EM:OEM0 table not found!!
> >
> > [    0.415527] intel_setup_crystal_cove_sd_regulators: no match device
> found
> >
> > [    0.700807] hpet: number irqs doesn't agree with number of timers
> >
> > [    0.786072] ------------[ cut here ]------------
> >
> > [    0.791287] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:52
> > sysfs_warn_dup+0x86/0xa0()
> >
> > [    0.799785] sysfs: cannot create duplicate filename
> > '/devices/virtual/extcon/hdmi'
> >
> > [    0.808710] ---[ end trace 386b12882abb18b3 ]---
> >
> > [    0.813927] ------------[ cut here ]------------
> >
> > [    0.819123] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240
> > kobject_add_internal+0x284/0x3f0()
> >
> > [    0.828776] ---[ end trace 386b12882abb18b4 ]---
> >
> > [    0.938056] mei_txe 0000:00:1a.0: TXE8086: acpi __CRS resource not
> found
> >
> > [    0.989940] intel_byt_dts_thermal: request_threaded_irq ret -22
> >
> > [    1.032730] intel_rapl: RAPL domain package detection failed
> >
> > [    1.039106] intel_rapl: RAPL domain core detection failed
> >
> > [    1.045197] intel_rapl: RAPL domain uncore detection failed
> >
> > [    1.051464] intel_rapl: RAPL domain dram detection failed
> >
> > [    1.057555] intel_rapl: no valid rapl domains found in package 0
> >
> > [    1.084405] otg_wakelock_init: No USB transceiver found
> >
> > [    1.090902] init: failed to probe driver -19
> >
> > [    1.098274] had: Vidya: Enter alsa_card_intelhad_init
> >
> > [    1.209036] init: could not import file '/init.userfastboot.rc' from
> > '/init.rc'
> >
> > [    1.494081] init: /dev/hw_random not found
> >
> > [    1.499939] init: /dev/hw_random not found
> >
> > [    1.514801] init: Warning!  Service dhcpcd_eth0 needs a SELinux
> > domain defined; please fix!
> >
> > [    1.533180] userfastboot: starting graphics
> >
> > [    1.575054] ------------[ cut here ]------------
> >
> > [    1.575070] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11879
> > intel_modeset_check_state+0x66f/0x770()
> >
> > [    1.575247] ---[ end trace 386b12882abb18b6 ]---
> >
> > [    1.575250] ------------[ cut here ]------------
> >
> > [    1.575256] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11879
> > intel_modeset_check_state+0x66f/0x770()
> >
> > [    1.575409] ---[ end trace 386b12882abb18b7 ]---
> >
> > [    1.575411] ------------[ cut here ]------------
> >
> > [    1.575417] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11900
> > intel_modeset_check_state+0x62a/0x770()
> >
> > [    1.575569] ---[ end trace 386b12882abb18b8 ]---
> >
> > [    1.575571] ------------[ cut here ]------------
> >
> > [    1.575578] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11900
> > intel_modeset_check_state+0x62a/0x770()
> >
> > [    1.575735] ---[ end trace 386b12882abb18b9 ]---
> >
> > [    1.575741] ------------[ cut here ]------------
> >
> > [    1.575747] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11879
> > intel_modeset_check_state+0x66f/0x770()
> >
> > [    1.575919] ---[ end trace 386b12882abb18ba ]---
> >
> > [    1.575922] ------------[ cut here ]------------
> >
> > [    1.575929] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11879
> > intel_modeset_check_state+0x66f/0x770()
> >
> > [    1.576069] ---[ end trace 386b12882abb18bb ]---
> >
> > [    1.576070] ------------[ cut here ]------------
> >
> > [    1.576076] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11900
> > intel_modeset_check_state+0x62a/0x770()
> >
> > [    1.576216] ---[ end trace 386b12882abb18bc ]---
> >
> > [    1.576219] ------------[ cut here ]------------
> >
> > [    1.576225] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11900
> > intel_modeset_check_state+0x62a/0x770()
> >
> > [    1.576368] ---[ end trace 386b12882abb18bd ]---
> >
> > [    1.576389] ------------[ cut here ]------------
> >
> > [    1.576395] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11879
> > intel_modeset_check_state+0x66f/0x770()
> >
> > [    1.576536] ---[ end trace 386b12882abb18be ]---
> >
> > [    1.576538] ------------[ cut here ]------------
> >
> > [    1.576544] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11879
> > intel_modeset_check_state+0x66f/0x770()
> >
> > [    1.576684] ---[ end trace 386b12882abb18bf ]---
> >
> > [    1.576685] ------------[ cut here ]------------
> >
> > [    1.576691] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11900
> > intel_modeset_check_state+0x62a/0x770()
> >
> > [    1.576858] ---[ end trace 386b12882abb18c0 ]---
> >
> > [    1.576861] ------------[ cut here ]------------
> >
> > [    1.576868] WARNING: CPU: 1 PID: 1685 at
> > drivers/gpu/drm/i915/intel_display.c:11900
> > intel_modeset_check_state+0x62a/0x770()
> >
> > [    1.577012] ---[ end trace 386b12882abb18c1 ]---
> >
> > [    1.859978] usb 1-2: ep 0x81 - rounding interval to 64 microframes,
> > ep desc says 80 microframes
> >
> > [    1.869761] usb 1-2: ep 0x82 - rounding interval to 1024 microframes,
> > ep desc says 2040 microframes
> >
> > [    2.039315] userfastboot: graphics OK
> >
> > *****
> >
> >
> >
> > The DHCP error in that list has me a bit worried since provisioning is
> > supposed to happen over Ethernet.
> >
> > From the console, I can access a shell prompt.
> >
> >
> >
> > Any help is greatly appreciated!
> >
> > --
> > Dave Smith, PE
> >
> > @devunwired
> >
> >
> >
> >
> >
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150609/4fec4a5c/attachment-0001.html>