[MinnowBoard] Silverjaw working?

Wei, David david.wei at intel.com
Wed May 20 08:21:21 UTC 2015


Could you file a bug on https://wiki.yoctoproject.org/wiki/Minnow_Bug_Triage. We will try to order an mSATA drive and check what’s wrong.

Thanks,
David | SSG BIOS

From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Jeremy Hoel
Sent: Wednesday, May 20, 2015 12:59 PM
To: MinnowBoard Development and Community Discussion
Subject: Re: [MinnowBoard] Silverjaw working?

With a mSata drive installed the only options I see in the Boot Manger are EFI Shell and IPv4/IPv6 network options.  It basically looks the same with or without the mSata drive in it's slot.

With a normal sata drive attached, I actually get an option for that drive, so I know at least the onboard sata channel works.



On Sun, May 17, 2015 at 8:38 PM, Wei, David <david.wei at intel.com<mailto:david.wei at intel.com>> wrote:
Could you attach your mSATA to platform and boot into UEFI Shell? Then tell us if any devices are listed by UEFI Shell?

How to boot to UEFI Shell

(1)    Power on the board and keep pressing “F2” key on your keyboard, which will allow you to enter BIOS Setup.

(2)    Enter  “Boot Manager” of BIOS Setup, and then select UEFI Shell to boot.

Thanks,
David | SSG BIOS

From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org<mailto:elinux-minnowboard-bounces at lists.elinux.org>] On Behalf Of Jeremy Hoel
Sent: Friday, May 15, 2015 1:44 PM
To: MinnowBoard Development and Community Discussion
Subject: Re: [MinnowBoard] Silverjaw working?

Sorry, I was out of town for a bit.

With no other devices attached, when I boot I see:

UEFI Interactive Shell
EDK II
EUFI v2.40 (EDK II, 0x00010000)
Error. No mapping gound
Press ESC to skip....

I get that with two different, known working mSata drives.

I get the same thing with no drive installed.

On Thu, May 7, 2015 at 11:30 AM, Bill Traynor <btraynor at gmail.com<mailto:btraynor at gmail.com>> wrote:
Hi Jeremy,

When the mSATA drive and mPCIe wireless card are plugged into the
Silverjaw and you power up the Max what happens?  Does the Max default
to the UEFI shell?  If it does, what is displayed?

On Thu, May 7, 2015 at 1:13 PM, nb <nb at dagami.org<mailto:nb at dagami.org>> wrote:
> Hi Jeremy,
>
> I’ve had sometimes non detected disks.
> Everytime it was a power supply issue.
> Hope this helps
>
> nb
>
>
>> Le 7 mai 2015 à 18:27, Jeremy Hoel <jthoel at gmail.com<mailto:jthoel at gmail.com>> a écrit :
>>
>> So i tested the mSata in another laptop and it worked, and i grabbed that mSata (that was in the laptop and working) and tested it in the silverjaw and it still wasn't detected by the firmware as a boot option, no in the OS when live booed.  Is there something in the efi firmware settings that I should make sure ie enabled?
>>
>> I'll give Mint a try and see if that finds the drive.
>>
>> On Thu, May 7, 2015 at 6:02 AM, Bill Traynor <btraynor at gmail.com<mailto:btraynor at gmail.com>> wrote:
>> Worked perfectly for me as well.  I have an Adata 120GB drive.
>> Installed Debian straight to it.
>>
>> On Thu, May 7, 2015 at 7:57 AM, Scott Guthrie <scottgu3 at gmail.com<mailto:scottgu3 at gmail.com>> wrote:
>> > Sounds like your best bet.  My crucial M550 worked perfectly, but I'm also
>> > running Linux Mint 17.1 Rebecca (XFCE).
>> >
>> > Scott
>> >
>> > On Thu, May 7, 2015 at 1:18 AM, Jeremy Hoel <jthoel at gmail.com<mailto:jthoel at gmail.com>> wrote:
>> >>
>> >> Ok, well after talking with John, I upgraded my firmware from .73 to .79.
>> >> I still can't see the msata, but i can see the wireless, so I'm going to try
>> >> and find another msata to use to test.
>> >>
>> >>
>> >> On Wed, May 6, 2015 at 9:58 PM, Jeremy Hoel <jthoel at gmail.com<mailto:jthoel at gmail.com>> wrote:
>> >>>
>> >>> well unless the board is labeled wrong, it's in the msata slot.  look at
>> >>> it when it's attached, i's the slot on the left.
>> >>>
>> >>> On Wed, May 6, 2015 at 9:56 PM, Kevron Rees <tripzero.kev at gmail.com<mailto:tripzero.kev at gmail.com>>
>> >>> wrote:
>> >>>>
>> >>>> Make sure the msata is in the msata slot not the mpcie...
>> >>>>
>> >>>> On May 6, 2015 8:50 PM, "Jeremy Hoel" <jthoel at gmail.com<mailto:jthoel at gmail.com>> wrote:
>> >>>>>
>> >>>>> So, I got my silverjaw and my nice new 3amp PS showed up today, so I
>> >>>>> wanted to give it a go this evening.  I've got a Samsung mSata 256GB
>> >>>>> installed (MZ-MPC256D) but it seems like the CentOS installed doesn't see
>> >>>>> it.
>> >>>>>
>> >>>>> Are their any particular firmware settings that need to be installed
>> >>>>> for an OS to see the card?  I measured 3.3 and 5v at the test points to the
>> >>>>> ground post, but no lights come on when the MBM is powered.  Is there a
>> >>>>> power LED?
>> >>>>>
>> >>>>> Also, when testing with my xbmc ubuntu install (3.14.13 kernel) it
>> >>>>> doesn't see anything in dmesg for sda or msata.
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> _______________________________________________
>> >>>>> elinux-MinnowBoard mailing list
>> >>>>> elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
>> >>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>>>>
>> >>>>
>> >>>> _______________________________________________
>> >>>> elinux-MinnowBoard mailing list
>> >>>> elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
>> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>>>
>> >>>
>> >>
>> >>
>> >> _______________________________________________
>> >> elinux-MinnowBoard mailing list
>> >> elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
>> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>
>> >
>> >
>> > _______________________________________________
>> > elinux-MinnowBoard mailing list
>> > elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard


_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150520/4eab5e85/attachment-0001.html>


More information about the elinux-MinnowBoard mailing list