[MinnowBoard] Silverjaw working?

[Scott Guthrie]

I didn't do anything to my Minnowboard or the SilverJaw lure to get it to
work.  I'd be surprised if it was a CentOS issue, it'll be interesting to
see if it is or not.

S.

On Thu, May 7, 2015 at 12:27 PM, Jeremy Hoel <jthoel at gmail.com> wrote:

> So i tested the mSata in another laptop and it worked, and i grabbed that
> mSata (that was in the laptop and working) and tested it in the silverjaw
> and it still wasn't detected by the firmware as a boot option, no in the OS
> when live booed.  Is there something in the efi firmware settings that I
> should make sure ie enabled?
>
> I'll give Mint a try and see if that finds the drive.
>
> On Thu, May 7, 2015 at 6:02 AM, Bill Traynor <btraynor at gmail.com> wrote:
>
>> Worked perfectly for me as well.  I have an Adata 120GB drive.
>> Installed Debian straight to it.
>>
>> On Thu, May 7, 2015 at 7:57 AM, Scott Guthrie <scottgu3 at gmail.com> wrote:
>> > Sounds like your best bet.  My crucial M550 worked perfectly, but I'm
>> also
>> > running Linux Mint 17.1 Rebecca (XFCE).
>> >
>> > Scott
>> >
>> > On Thu, May 7, 2015 at 1:18 AM, Jeremy Hoel <jthoel at gmail.com> wrote:
>> >>
>> >> Ok, well after talking with John, I upgraded my firmware from .73 to
>> .79.
>> >> I still can't see the msata, but i can see the wireless, so I'm going
>> to try
>> >> and find another msata to use to test.
>> >>
>> >>
>> >> On Wed, May 6, 2015 at 9:58 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
>> >>>
>> >>> well unless the board is labeled wrong, it's in the msata slot.  look
>> at
>> >>> it when it's attached, i's the slot on the left.
>> >>>
>> >>> On Wed, May 6, 2015 at 9:56 PM, Kevron Rees <tripzero.kev at gmail.com>
>> >>> wrote:
>> >>>>
>> >>>> Make sure the msata is in the msata slot not the mpcie...
>> >>>>
>> >>>> On May 6, 2015 8:50 PM, "Jeremy Hoel" <jthoel at gmail.com> wrote:
>> >>>>>
>> >>>>> So, I got my silverjaw and my nice new 3amp PS showed up today, so I
>> >>>>> wanted to give it a go this evening.  I've got a Samsung mSata 256GB
>> >>>>> installed (MZ-MPC256D) but it seems like the CentOS installed
>> doesn't see
>> >>>>> it.
>> >>>>>
>> >>>>> Are their any particular firmware settings that need to be installed
>> >>>>> for an OS to see the card?  I measured 3.3 and 5v at the test
>> points to the
>> >>>>> ground post, but no lights come on when the MBM is powered.  Is
>> there a
>> >>>>> power LED?
>> >>>>>
>> >>>>> Also, when testing with my xbmc ubuntu install (3.14.13 kernel) it
>> >>>>> doesn't see anything in dmesg for sda or msata.
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> _______________________________________________
>> >>>>> elinux-MinnowBoard mailing list
>> >>>>> elinux-MinnowBoard at lists.elinux.org
>> >>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>>>>
>> >>>>
>> >>>> _______________________________________________
>> >>>> elinux-MinnowBoard mailing list
>> >>>> elinux-MinnowBoard at lists.elinux.org
>> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>>>
>> >>>
>> >>
>> >>
>> >> _______________________________________________
>> >> elinux-MinnowBoard mailing list
>> >> elinux-MinnowBoard at lists.elinux.org
>> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>
>> >
>> >
>> > _______________________________________________
>> > elinux-MinnowBoard mailing list
>> > elinux-MinnowBoard at lists.elinux.org
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150507/e0eed10e/attachment-0001.html>