[MinnowBoard] Silverjaw working?

[Jeremy Hoel]

Ok, well after talking with John, I upgraded my firmware from .73 to .79.
I still can't see the msata, but i can see the wireless, so I'm going to
try and find another msata to use to test.


On Wed, May 6, 2015 at 9:58 PM, Jeremy Hoel <jthoel at gmail.com> wrote:

> well unless the board is labeled wrong, it's in the msata slot.  look at
> it when it's attached, i's the slot on the left.
>
> On Wed, May 6, 2015 at 9:56 PM, Kevron Rees <tripzero.kev at gmail.com>
> wrote:
>
>> Make sure the msata is in the msata slot not the mpcie...
>> On May 6, 2015 8:50 PM, "Jeremy Hoel" <jthoel at gmail.com> wrote:
>>
>>> So, I got my silverjaw and my nice new 3amp PS showed up today, so I
>>> wanted to give it a go this evening.  I've got a Samsung mSata 256GB
>>> installed (MZ-MPC256D) but it seems like the CentOS installed doesn't see
>>> it.
>>>
>>> Are their any particular firmware settings that need to be installed for
>>> an OS to see the card?  I measured 3.3 and 5v at the test points to the
>>> ground post, but no lights come on when the MBM is powered.  Is there a
>>> power LED?
>>>
>>> Also, when testing with my xbmc ubuntu install (3.14.13 kernel) it
>>> doesn't see anything in dmesg for sda or msata.
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>
>>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150506/097a3197/attachment.html>