[MinnowBoard] Silverjaw working?

[Jeremy Hoel]

well unless the board is labeled wrong, it's in the msata slot.  look at it
when it's attached, i's the slot on the left.

On Wed, May 6, 2015 at 9:56 PM, Kevron Rees <tripzero.kev at gmail.com> wrote:

> Make sure the msata is in the msata slot not the mpcie...
> On May 6, 2015 8:50 PM, "Jeremy Hoel" <jthoel at gmail.com> wrote:
>
>> So, I got my silverjaw and my nice new 3amp PS showed up today, so I
>> wanted to give it a go this evening.  I've got a Samsung mSata 256GB
>> installed (MZ-MPC256D) but it seems like the CentOS installed doesn't see
>> it.
>>
>> Are their any particular firmware settings that need to be installed for
>> an OS to see the card?  I measured 3.3 and 5v at the test points to the
>> ground post, but no lights come on when the MBM is powered.  Is there a
>> power LED?
>>
>> Also, when testing with my xbmc ubuntu install (3.14.13 kernel) it
>> doesn't see anything in dmesg for sda or msata.
>>
>>
>>
>>
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150506/4af6e0b2/attachment.html>