[MinnowBoard] MinnowBoard Max won't boot.

[Anders, David]

You should start off with the UART console to determine if the device is booting:

http://elinux.org/Minnowboard:MinnowMax#6-Wire_Serial_Console

Dave



From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Eric owens
Sent: Monday, April 13, 2015 2:46 PM
To: MinnowBoard Development and Community Discussion
Subject: Re: [MinnowBoard] MinnowBoard Max won't boot.

Ok, I guess it's an HDMI issue.  Another responder suggested a different cable/adapter.  Any specific suggestions here?  If that doesn't work, what next?

Thanks
________________________________
From: Michael<mailto:michael at kmaclub.com>
Sent: ‎4/‎13/‎2015 11:51 AM
To: MinnowBoard Development and Community Discussion<mailto:elinux-minnowboard at lists.elinux.org>
Subject: Re: [MinnowBoard] MinnowBoard Max won't boot.
On 04/13/2015 11:47 AM, ericolv at cox.net<mailto:ericolv at cox.net> wrote:
> Ok, thanks for the reply.
>
> I haven't seen anything on my screen at all.  Am I correct in assuming that I should, at least, see the shell, without any sd card or usb stick?
>
>


Yes, you should get the shell without any SD card or USB stick.

I regularly netboot mine without having either inserted and I can
interact with the console.

Michael

_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150413/07677d18/attachment-0001.html>