[MinnowBoard] Trouble booting new Minnowboard Max

[Bill Traynor]

FWIW, that information came from:


On Mon, Mar 30, 2015 at 1:04 PM, Xi Chen <xixi.xichen at gmail.com> wrote:
> Hi Bill,
>
> Thanks you are right, I missed the ":" after fs0! Thank you!
>
> Xi
>
> On Mon, Mar 30, 2015 at 9:55 AM, Bill Traynor <btraynor at gmail.com> wrote:
>>
>> Try:
>>
>> fs0:   <-- not the colon after fs0
>>
>>
>> On Mon, Mar 30, 2015 at 12:48 PM, Xi Chen <xixi.xichen at gmail.com> wrote:
>> > Hi,
>> >
>> > I received a new Minnowboard Max but are having trouble starting it.
>> >
>> > First I connected it to a HDMI display and powered up, got no display.
>> > Checked bug report documentation and thought it might be a firmware
>> > issue.
>> >
>> > So I set up display through serial with a USB/UART cable, this way I was
>> > able to enter the EFI shell. And I checked the firmware version on my
>> > board,
>> > it's MNW2MAX1.x64.0077.R01.1501281701. So I thought the problem I have
>> > is
>> > not a firmware problem, because that HDMI related firmware bug is said
>> > to be
>> > fixed in firmwares after 8/13/2014.
>> >
>> > In addition, in the EFI shell mode, I can't seem to go to fs0, which is
>> > needed for firmware upgrade or installing OS. When I type fs0, I got the
>> > message:
>> >
>> > 'fs0' is not recognized as an internal or external command, operable
>> > program, or batch file.
>> >
>> > Can someone please help? Thanks!
>> >
>> > Xi
>> >
>> > _______________________________________________
>> > elinux-MinnowBoard mailing list
>> > elinux-MinnowBoard at lists.elinux.org
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>