[MinnowBoard] ***Heads up*** - Plate over HSE should be removed!

John Roach john.roach at minlog.com.au
Thu Mar 12 22:40:29 UTC 2015


Thank you John. We just removed ours, seems we have been very lucky
over the last few months as our boards are not damaged.
Cheers,
------------------------
John Roach
MinLog Australia
Tel +61 (2) 49687102
john.roach at minlog.com.au


On 13 March 2015 at 04:59, John Hawley <john.hawley at intel.com> wrote:
> Quick heads up!!!
>
> We are getting reports that a plate is getting left over the HSE (High
> Speed Expansion) header from manufacturing.  This is *BAD*, and will
> likely lead to your board becoming irreparably damaged.
>
> If you have received a board recently please double check your HSE
> (bottom of the board) and see if there's a metal plate there.  If it is
> *PLEASE* remove it before using your board.
>
> If your board develops issue, and you have this plate over your HSE
> please contact rma (at) minnowboard.org
>
> More details can be found at
> http://elinux.org/Minnowboard:MinnowMax_HSE_issue
>
> You can find a quick image that shows what the HSE should look like with
> and without the plate.
>
> Thanks!
>
> - John 'Warthog9' Hawley
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>


More information about the elinux-MinnowBoard mailing list