[MinnowBoard] Programming flash
robert at layer2.com
Wed Nov 5 03:02:16 UTC 2014
Documentation (such as http://www.elinux.org/Minnowboard:SPI_Boot_flash)
indicates that the Minnowboad flash can be programmed using the TinCanTools
Flyswatter2. But I have been unable to find either a schematic or actual
cable to connect from the Flyswatter 20 pin JTAG connector to the
Minnowboard 8 pin SPI connector (or even determine if those are the right
connectors to use). Can anyone point me in the right direction?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the elinux-MinnowBoard