[MinnowBoard] MAX at 90ºC

[Thiago Tenório Jordão de Vasconcelos]

Yes, I think Ill put a small fan on the top of the board.
Just blowing on it drops from 90 to ~70.

Ill put a fan and come back after that.

Atenciosamente,

Thiago Vasconcelos

--
Programador Web
Portfolio: http://thiagottjv.com
Fone:+55-81-96320562

On Mon, Oct 27, 2014 at 2:27 AM, Jeremy Hoel <jthoel at gmail.com> wrote:

> I think I hit 81 at the highest.. it's a rev___  no rev entered.
>  putting a small fan over the cpu dropped it down to under 60. I might tap
> into that for the fan and keep running off the SD.
>
> On Sun, Oct 26, 2014 at 11:22 PM, Thiago Tenório Jordão de Vasconcelos <
> thiagottjv at gmail.com> wrote:
>
>> The temp keeps rising or it stopped at ~78ºC?
>>
>> What is you board revision?
>>
>> Thanks!
>>
>> Thiago Vasconcelos
>>
>> On Mon, Oct 27, 2014 at 2:18 AM, Jeremy Hoel <jthoel at gmail.com> wrote:
>>
>>> Ok.. so right now at idle its
>>> root at xbmc:~# uname -a
>>> Linux xbmc 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014
>>> x86_64 x86_64 x86_64 GNU/Linux
>>>
>>>
>>> root at xbmc:~# sensors
>>> acpitz-virtual-0
>>> Adapter: Virtual device
>>> temp1:        +26.8°C  (crit = +90.0°C)
>>>
>>> coretemp-isa-0000
>>> Adapter: ISA adapter
>>> Core 0:       +53.0°C  (high = +110.0°C, crit = +110.0°C)
>>> Core 2:       +52.0°C  (high = +110.0°C, crit = +110.0°C)
>>>
>>>
>>> using xbmc and playing a x264 mkv 1080p movie (6.5gb) for about 15
>>> minutes..
>>> top is around  0.55, 0.34, 0.16  depending on the area.. anywhere
>>> between .3 and .6
>>> and sensors shows
>>>
>>> root at xbmc:~# sensors
>>> acpitz-virtual-0
>>> Adapter: Virtual device
>>> temp1:        +26.8°C  (crit = +90.0°C)
>>>
>>> coretemp-isa-0000
>>> Adapter: ISA adapter
>>> Core 0:       +78.0°C  (high = +110.0°C, crit = +110.0°C)
>>> Core 2:       +76.0°C  (high = +110.0°C, crit = +110.0°C)
>>>
>>> The heat sink reads about 125f on the metal.
>>>
>>>
>>> Seeing the above note about a 3.14 kernel makes me want to find a newer
>>> one and try it out.
>>>
>>> On Sun, Oct 26, 2014 at 10:33 PM, Thiago Tenório Jordão de Vasconcelos <
>>> thiagottjv at gmail.com> wrote:
>>>
>>>> Hi guys,
>>>>
>>>> I installed the Windows 10 and updated the firmware to the 0.73.
>>>> Using the software RealTemp I got 83ºC with VLC and the same movie.
>>>>
>>>> What temperatures are you guys getting?
>>>>
>>>> Is this temperature normal for the MBM or is something wrong with my
>>>> board?
>>>>
>>>> Thanks,
>>>>
>>>> Thiago Vasconcelos
>>>>
>>>> _______________________________________________
>>>> elinux-MinnowBoard mailing list
>>>> elinux-MinnowBoard at lists.elinux.org
>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>
>>>>
>>>
>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>
>>>
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141027/2e9a420a/attachment-0001.html>