[MinnowBoard] Trying to update firmware
jthoel at gmail.com
Sun Oct 26 01:46:13 UTC 2014
Yup.. I found the firmware here:
Each zip has two bin files, a D02 and R02.. the D02 I assumed was debug so
I installed the R02.
I used the FirmwareUpdate.efi from the minnowboard package that John
mentioned in Augest
https://bugzilla.yoctoproject.org/attachment.cgi?id=2087 (that's a 64 bit
On Fri, Oct 24, 2014 at 2:32 AM, Thiago Tenório Jordão de Vasconcelos <
thiagottjv at gmail.com> wrote:
> Did you updated the firmware?
> How can I do that? I saw on the uefidk.com site but is too complicated
> (compared with the Original board).
> Thiago Vasconcelos
> Programador Web
> Portfolio: http://thiagottjv.com
> On Sun, Oct 19, 2014 at 4:14 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
>> Never mind.. I found my problem. Minnowboard Max.. not Minnowboard. All
>> better now.
>> On Sun, Oct 19, 2014 at 12:58 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
>>> So, following the instructions from here (1) I grabbed the files for
>>> both the 1.0 and 0.94 firmware, extracted them to a FAT based UBS stick and
>>> booted the MM. When I got to the interactive efi boot, I was able to get
>>> to the USB drive and when I run the command 'FirmwareUpdate -f MINNOW.fd' I
>>> get the message "Image type IA32 is not supported by this X64 shell".
>>> Now, there is not other options for the FirewareUpdate or the MINNOW.fd
>>> files.. there are no other files referencing x64 or X32.
>>> Am I missing something?
>>> 1 - http://www.elinux.org/Minnowboard:SPI_Boot_flash
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the elinux-MinnowBoard