[MinnowBoard] Trying to update firmware

[Thiago Tenório Jordão de Vasconcelos]

Jeremy,

Did you updated the firmware?
How can I do that? I saw on the uefidk.com site but is too complicated
(compared with the Original board).

Atenciosamente,

Thiago Vasconcelos

--
Programador Web
Portfolio: http://thiagottjv.com
Fone:+55-81-96320562

On Sun, Oct 19, 2014 at 4:14 PM, Jeremy Hoel <jthoel at gmail.com> wrote:

> Never mind.. I found my problem.  Minnowboard Max.. not Minnowboard.  All
> better now.
>
> On Sun, Oct 19, 2014 at 12:58 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
>
>> So, following the instructions from here (1) I grabbed the files for both
>> the 1.0 and 0.94 firmware, extracted them to a FAT based UBS stick and
>> booted the MM.  When I got to the interactive efi boot, I was able to get
>> to the USB drive and when I run the command 'FirmwareUpdate -f MINNOW.fd' I
>> get the message "Image type IA32 is not supported by this X64 shell".
>>
>> Now, there is not other options for the FirewareUpdate or the MINNOW.fd
>> files.. there are no other files referencing x64 or X32.
>>
>>
>> Am I missing something?
>>
>> 1 - http://www.elinux.org/Minnowboard:SPI_Boot_flash
>>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141023/c31f1e4a/attachment.html>