[MinnowBoard] [Help] Communicating with an Arduino Based Autopilot (Minnow 1.0 dora RC1 BSP)

Suresh Ratnam suresh080891 at gmail.com
Thu Apr 10 22:22:16 UTC 2014


Thanks for the update! I will build it and test it. However, my knowledge
is limited. Are there any resources that you recommend?


On Thu, Apr 10, 2014 at 3:30 PM, Darren Hart <dvhart at linux.intel.com> wrote:

> Just FYI. I've updated the dora branch with the new meta-data and updated
> the kernel to 3.10.35-LTSI. I've pushed and tagged this as
> 1.0-rc1-dora-10.0.1. This is pending final AB builds, but I don't expect
> any changes between rc1 and 1.0 - unless testing here indicates a need.
>
> This includes the CONFIG_USB_ACM module. I'd appreciate a build and test
> to confirm this resolves the request.
>
> On 4/9/14, 22:53, "Koen Kooi" <koen at dominion.thruhere.net> wrote:
>
> >Normally the autobuilder will build do a nightly build for 'dora' once
> >every week, but with the heartbleed issue there will be multiple builds
> >this week.
> >
> >Op 10 apr. 2014, om 01:52 heeft Darren Hart <dvhart at linux.intel.com> het
> >volgende geschreven:
> >
> >> I expect the meta-minnow/dora branch to be ready by Friday if not
> >>earlier. You'll need a response from Koen on the Angstrom ETA and update
> >>mechanism. Also depends on which Angstrom image you are running.
> >>
> >> You can also build the image yourself using the Angstrom build scripts.
> >>
> >> --
> >> Darren Hart                                  Open Source Technology
> Center
> >> darren.hart at intel.com                                            Intel
> Corporation
> >>
> >> From: Suresh Ratnam <suresh080891 at gmail.com>
> >> Reply-To: MinnowBoard Development and Community Discussion
> >><elinux-minnowboard at lists.elinux.org>
> >> Date: Wednesday, April 9, 2014 at 15:30
> >> To: MinnowBoard Development and Community Discussion
> >><elinux-minnowboard at lists.elinux.org>
> >> Subject: Re: [MinnowBoard] [Help] Communicating with an Arduino Based
> >>Autopilot
> >>
> >>> Thanks! Can I get an ETA for the update so that I can make decisions
> >>>for this project. The communication between the two is the last piece.
> >>> Also, how would the update be applied? Is it through opkg upgrade or
> >>>do I need to update the kernel?
> >>> Once again, I appreciate the help
> >>> On Apr 9, 2014 2:34 PM, "Darren Hart" <dvhart at linux.intel.com> wrote:
> >>>> I verified that it was missing from the BSP and I have submitted the
> >>>>meta
> >>>> data to add it to the linux-yocto repository. Once that merges, I'll
> >>>> update the meta-minnow/dora branch to include it. At that point, I'll
> >>>> likely tag and release minnow/dora and request Koen kick off new
> >>>>Angstrom
> >>>> builds for dora.
> >>>>
> >>>> --
> >>>> Darren
> >>>>
> >>>> On 4/9/14, 11:26, "selsinork at gmail.com" <selsinork at gmail.com> wrote:
> >>>>
> >>>> >No, it has nothing to do with opkg. CONFIG_USB_ACM is the kernel
> >>>>config
> >>>> >option that's required to have the cdc-acm driver built.
> >>>> >
> >>>> >Darren can add it in the BSP to make the module available.
> >>>> >
> >>>> >On 09/04/14 18:45, Suresh Ratnam wrote:
> >>>> >> Thanks selsinor. I read up on that and try it later today.
> >>>> >> Is it through opkg or are the specific steps?
> >>>> >>
> >>>> >> On Apr 9, 2014 11:12 AM, <selsinork at gmail.com> wrote:
> >>>> >>
> >>>> >>> CONFIG_USB_ACM will enable it, but really you probably want to
> >>>>enable
> >>>> >>>as
> >>>> >>> modules drivers for every usb device you can.
> >>>> >>>
> >>>> >>>
> >>>> >>> On 09/04/14 17:16, Darren Hart wrote:
> >>>> >>>> This is very likely due to that particular driver not being
> >>>>included
> >>>> >>>>by
> >>>> >>> the
> >>>> >>>> BSP. You can verify by determining the specific CONFIG required
> >>>>and
> >>>> >>>> verifying it is or is not in your kernel config
> >>>>(/proc/config.gz). If
> >>>> >>>>it
> >>>> >>> is,
> >>>> >>>> you can verify in the driver source fi the vendor/product ID is
> >>>> >>> supported by
> >>>> >>>> the driver.
> >>>> >>>>
> >>>> >>>> I suspect you just need to build the driver. If you find the
> >>>>CONFIG is
> >>>> >>>> missing, just let me know what it is you want added and I'll
> >>>>update
> >>>> >>>>the
> >>>> >>> BSP.
> >>>> >>>> In the mean time, you can install the kernel dev packages and
> >>>>build it
> >>>> >>>> yourself.
> >>>> >>>>
> >>>> >>>> We have 3.10-LTSI support in the dora branch of the minnow BSP
> >>>>layer
> >>>> >>>> currently. I was about to tag it and release it, but let's make
> >>>>sure
> >>>> >>>>it
> >>>> >>> has
> >>>> >>>> the support you need first. If not, I'll add it first.
> >>>> >>>>
> >>>> >>>>
> >>>> >>>>
> >>>> >>>> _______________________________________________
> >>>> >>>> elinux-MinnowBoard mailing list
> >>>> >>>> elinux-MinnowBoard at lists.elinux.org
> >>>> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>> >>>>
> >>>> >>>
> >>>> >>> _______________________________________________
> >>>> >>> elinux-MinnowBoard mailing list
> >>>> >>> elinux-MinnowBoard at lists.elinux.org
> >>>> >>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>> >>>
> >>>> >>
> >>>> >>
> >>>> >>
> >>>> >> _______________________________________________
> >>>> >> elinux-MinnowBoard mailing list
> >>>> >> elinux-MinnowBoard at lists.elinux.org
> >>>> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>> >>
> >>>> >
> >>>> >_______________________________________________
> >>>> >elinux-MinnowBoard mailing list
> >>>> >elinux-MinnowBoard at lists.elinux.org
> >>>> >http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>> >
> >>>>
> >>>>
> >>>> --
> >>>> Darren Hart                                     Open Source
> >>>>Technology Center
> >>>> darren.hart at intel.com                                       Intel
> >>>>Corporation
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> elinux-MinnowBoard mailing list
> >>>> elinux-MinnowBoard at lists.elinux.org
> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>> _______________________________________________ elinux-MinnowBoard
> >>>mailing list elinux-MinnowBoard at lists.elinux.org
> >>>http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >
> >
>
>
> --
> Darren Hart                                     Open Source Technology
> Center
> darren.hart at intel.com                                       Intel
> Corporation
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140410/53b520f8/attachment.html>


More information about the elinux-MinnowBoard mailing list