[Elinux-discuss] configuration of linux with emmc
chai18740449846 at gmail.com
Sun Dec 27 16:54:08 UTC 2015
thanks for your replay
sorry for my vague question :)
my question is------->
we have designed a new pcb using tk1 as cpu and a 32GB emmc.,and i see the
offical is tk1 with 16GB emmc
so i want to know if i use 32GB emmc,what should i do to configure linux.
i hope this question is ok, sorry for my english
2015-12-27 23:00 GMT+08:00 Bill Traynor <btraynor at gmail.com>:
> I'm sorry Ekko, but your question is to vague. Can you describe in
> more detail exactly what you are trying to do? Are you intending to
> try to desolder the eMMC from the board and replace it? If this is
> what you're intending to do, I'd highly recommend not doing that.
> On Sat, Dec 26, 2015 at 11:38 PM, Ekko <chai18740449846 at gmail.com> wrote:
> > hello all
> > i got a question ----------- >
> > i want to replace the emmc of Jetson TK1,
> > what should i do to configure the linux.
> > thank you
> > --Ekko
> > _______________________________________________
> > Elinux-discuss mailing list
> > Elinux-discuss at lists.elinux.org
> > http://lists.elinux.org/mailman/listinfo/elinux-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Elinux-discuss